Direct factory pricing on unthreaded pipe flanges and flanges with threaded nipple โ engineered to ASME B16.5, EN 1092, and DIN standards. Trusted by procurement managers, technical directors, and operations teams across 20+ countries for high-load, corrosive, and thermally demanding piping systems.
๐ญ ASME B16.5 ยท EN 1092 ยท DIN ยท JIS Certified Manufacturer
Direct factory pricing on unthreaded pipe flanges and flanges with threaded nipple โ engineered to ASME B16.5, EN 1092, and DIN standards. Trusted by procurement managers, technical directors, and operations teams across 20+ countries for high-load, corrosive, and thermally demanding piping systems.
๐ Cangzhou Weihuan Pipeline Equipment Co., Ltd. โ Production facility
We talk to purchasing and engineering teams daily. These are the recurring bottlenecks we see across the US, Europe, and the Middle East:
Multi-tier distribution networks add 20โ40% to flange costs before you even receive a quotation. In a year of volatile steel pricing, that margin is unacceptable.
Traceability gaps on material test certificates (MTCs/EN 10204 3.1) create compliance headaches. Non-conforming heat treatment leads to premature cracking and costly downtime.
Freight and port surcharges often exceed the quoted FOB price by 15โ25%. Without consolidated logistics, buyers absorb unpredictable LCL premiums and customs delays.
A flange may be dimensionally correct but have the wrong facing finish, wrong thread type (NPT vs BSPT), or improper nipple length โ causing assembly failure on-site.
Quick reality check: In 2025, a European EPC contractor reported a 37% budget overrun on connector components due to rework from non-certified flange deliveries. The fix is not โcheaperโ โ it is a certified, factory-direct partner.
โ Request our compliance checklist to audit your current supplier
As a platform-based supply chain management enterprise, we combine direct manufacturing control with a dedicated export sales team. We are not a trading company that forwards your inquiry to five different factories โ we are the factory and the exporter, with unified responsibility for quality, delivery, and documentation.
1200+ tons monthly output across flanges, elbows, tees, reducers, and MCI fittings.
ISO 9001 quality system, PMI testing, hydrostatic pressure testing, and 100% dimensional inspection.
Custom facing, thread types, nipple lengths, and coatings. From drawing to container in 4โ6 weeks.
15โ30 days for standard items. Air-freight or consolidated ocean shipping to any major port.
Beyond flanges, we supply steel pipes, three-way tees, pipe elbows, reducers, and malleable cast iron (MCI) fittings. That means one PO, one inspection, one shipment โ reducing your procurement overhead and logistics complexity.
โ Compare your current MTO with our bundled flange + pipe quote
Below is the core specification matrix for our two flagship connection products. These values are directly citable in your engineering datasheets and supplier approval documents.
| Parameter | Unthreaded Pipe Flange (Slip-On) | Flange with Threaded Nipple |
|---|---|---|
| Design Standard | ASME B16.5, ASME B16.47, EN 1092-1, DIN 2576/2633, JIS B2220 | ASME B16.5 (flange) + ASME B1.20.1 / ISO 7-1 (threads) |
| Material Grades | ASTM A105, A105N, A350 LF2, ASTM A182 F304/L, F316/L, Alloy 20, Hastelloy C276 | Malleable cast iron (MCI), ASTM A105, ASTM A182 F304/F316, cast iron per ASTM A126 |
| Nominal Bore (DN) | DN15 โ DN600 (1/2" โ 24") | DN15 โ DN100 (1/2" โ 4") standard; custom to DN150 |
| Pressure Class | 150# โ 600# (PN16 โ PN100); custom to 900# | 150# โ 300# (PN16 โ PN40) typical for threaded service |
| Facing Types | RF (Raised Face), FF (Flat Face), RTJ (Ring Type Joint) | RF (Raised Face), FF (Flat Face) |
| Thread Types | N/A (welded to pipe) | NPT, NPTF, BSPT (R), BSPP (G), Metric (M) |
| Nipple Length | N/A | Standard 50mm / 80mm / 100mm; OEM custom 20โ300mm |
| Surface Treatment | Black oil, zinc epoxy, hot-dip galvanized, PTFE coating | Hot-dip galvanized, electro-galvanized, black phosphating, zinc-nickel |
| Certifications | ISO 9001, CE/PED, EN 10204 3.1 MTC, PMI report | ISO 9001, CE/PED, UL Listed (MCI options), EN 10204 3.1 |
โ Download our full material test certificate (MTC) sample
The unthreaded pipe flange โ commonly specified as a slip-on flange โ slides over the pipe bore and is secured via fillet welds at both the hub and the back. Because there are no threads, it allows for easier alignment in the field: the fitter can rotate the flange to match the bolt holes before welding, which dramatically reduces installation time.
From a cost perspective, the slip-on flange is 10โ20% more economical than a weld-neck flange in the same pressure class, while still offering excellent leak integrity for services up to 600#. Material options run from ASTM A105 carbon steel for general refinery use, to F316/L stainless for chemical, pharmaceutical, and offshore corrosive environments.
Key engineering note: In cyclic or thermal-fatigue applications, the fillet weld at the flange hub creates a localized stress concentration. Design engineers should evaluate the ASME B31.3 flexibility limit and account for the stress intensification factor (SIF) if the system undergoes >7,000 full thermal cycles.
CNC flange facing & drilling line
Typical dimensions for design engineers:
| DN (inch) | OD (mm) | Bore (mm) | Thickness (mm) | No. Bolts |
|---|---|---|---|---|
| 1/2" (DN15) | 88.9 | 22.4 | 11.2 | 4 |
| 2" (DN50) | 152.4 | 59.2 | 19.1 | 4 |
| 6" (DN150) | 279.4 | 154.2 | 25.4 | 8 |
| 12" (DN300) | 444.5 | 303.2 | 31.8 | 12 |
โ Need a full BN(B16.5) dimension chart? Request it in 30 seconds
Threaded nipple assembly & galvanizing line
A flange with threaded nipple combines a forged flange and a precision-cut threaded pipe nipple into a single pre-assembled unit. This product is a game-changer for applications where hot work (welding) is prohibited โ such as on-site installation in explosive atmospheres, offshore platforms, existing pipeline retrofits, or facilities with strict fire-safety permits.
The threaded nipple is manufactured to ASME B1.20.1 (NPT) or ISO 7-1 (BSPT) tolerances, with taper thread profile verified by laser contour measurement and ring-gauge inspection. The flange-to-nipple connection is sealed via a metal-to-metal tapered thread interference fit, capable of maintaining leak-tightness at rated pressure without sealant โ although PTFE tape or anaerobic sealant is recommended for repeat disassembly cycles.
Why buyers choose this: Installation is 60โ70% faster than welded flanges. Every unit is hydro-tested to 1.5ร the rated pressure before leaving our factory.
No welding, no NDT wait. Thread on and torque to spec.
Zero hot work โ ideal for hazardous area installations.
Disassemble and reassemble without destroying the joint.
โ Get torque specs and thread sealant recommendations for your service
We believe every component we ship should be backed by verifiable mechanical data. Here is how the current literature supports our design and material choices:
Simplified Nonlinear Dynamic Model for Pipe Structures with Bolted Flange Joints (Luan, Guan, Cheng & Liu, Journal of Sound and Vibration, 2012) established reduced-order models for flange joints under nonlinear contact. The implication for us: gasket seating stress and bolt preload consistency directly impact system dynamic stability. That is why we torque-test every threaded nipple flange assembly before logistics.
The 2025 paper Performance Material Selection in Rigid Flange Coupling Systems (Cureus Journal of Engineering) provides a decision matrix balancing mechanical strength, corrosion resistance, and cost. We apply this same logic: for saltwater exposure, we push 316L or duplex over carbon steel + coating; for high-temperature hydrocarbon service, we select A105 or F11 based on the ASME B16.5 pressure-temperature derating curves.
Per the Reference Stress Method for Defective Elbows โ R6 FAD Assessment and the Sustained Stress Indices at Tee Connections literature (available on ScienceDirect and Academia.edu), stress intensification factors (SIF) at pipe branch connections are often underestimated. While our flanges are not elbows or tees, the same principle applies to the flange-to-pipe transition zone in unthreaded pipe flanges โ an unground fillet weld can create a SIF of 2.1ร nominal stress. Our quality manual mandates smooth transition grinding for cyclic service.
Practical engineering takeaway: When selecting between an unthreaded pipe flange and a flange with threaded nipple, consider fatigue and thermal cycling. The threaded variant introduces a thread root stress concentration (~2.5โ3ร theoretical), so for severe cyclic duty above 2,000 cycles, ASTM F1545 or an unthreaded design with backing weld is recommended.
โ Request our flange stress calculation worksheet for your next project
Both product lines serve mission-critical roles in industrial piping networks. Here is where they are used most effectively:
Unthreaded pipe flanges in A105 and F316L for crude transfer lines, cooling water, and firewater loops. Rated to 600# with RTJ facing for critical hydrocarbon service. Case study: A Kazakhstan oilfield operator cut flange procurement costs by 31% after switching to our factory-direct supply.
Flange with threaded nipple (MCI and 316L) for chemical dosing lines, filter manifolds, and air-scour piping. Hot-dip galvanized exterior minimizes above-ground corrosion. A Canadian water utility achieved a 4-year zero-leak record on our MCI threaded flanges.
UL-listed malleable iron flanges with threaded nipple to NFPA 13. No welding on sprinkler risers means faster inspection and lower construction labor. A Middle East contractor reported a 22% reduction in installation hours using our pre-assembled units.
Stainless steel unthreaded flanges with PTFE gasket surfaces for sanitary process lines. Surface roughness โค 0.8 ยตm Ra on demand. US-based pharma OEM uses our F316L flanges in CIP/SIP systems with zero product contamination reports.
Threaded nipple flanges enable rapid tie-ins to existing steel pipe systems without shutting down the entire loop. District heating operators in Northern Europe value the simplicity and lower skilled-labor requirements of threaded assemblies.
ABS/DNV-approved material grades available. Flange with threaded nipple is a preferred choice for ballast line modifications where hot work permits are constrained. A Singapore shipyard standardized on our threaded assemblies for 3 retrofit projects.
โ Tell us your application โ receive 3 applicable case studies
Step 1: Material inbound โ ASTM A105/A182 verification with mill certificate traceability.
Step 2: Forging or casting (MCI) โ controlled temperature and pressure cycles.
Step 3: Heat treatment โ normalizing / annealing per API 20B or ASME requirements.
Step 4: Machining โ CNC lathe flange facing, boring, and drilling to ASME B16.5 tolerances.
Step 5: Threading (for threaded nipple flange) โ CNC thread milling + ring gauge inspection for NPT/BSPT.
Step 6: Weld assembly (for unthreaded flange) โ TIG root + MIG fill, 100% visual + optional dye-penetrant testing.
Step 7: Surface treatment โ galvanizing, epoxy, PTFE, or black oil per customer spec.
Step 8: Final QC โ dimensional, pressure, PMI, and coating thickness reports.
Step 9: Export packing โ plywood crates or steel pallets with desiccant and VCI anti-rust film.
QA commitment: We perform hydrostatic pressure testing at 1.5ร rated pressure on every flange with threaded nipple. Unthreaded flanges undergo 100% dimensional inspection with CMM for bolt-circle accuracy. MTCs are issued in accordance with EN 10204 Type 3.1.
โ Watch our 2-minute QC video tour (or request a live virtual factory inspection)
โ โ โ โ โ
โWe sourced 1,200 units of unthreaded pipe flanges (A105, 300#) for a Canadian water treatment upgrade. The MTC documentation was spotless, and every flange matched ASME tolerances. No rework.โ
โ โ โ โ โ
โTheir flange with threaded nipple solved our offshore hot-work bans. Installation crew finished ballast line tie-ins in 3 days instead of 2 weeks. Huge safety win.โ
โ โ โ โ โ
โWe ran an A/B comparison between Cangzhou Weihuan and our previous European supplier. Same spec, 27% lower total landed cost. Now we just reorder from their catalog.โ
Send us your specification list โ we will respond within 24 hours with pricing, lead time, and technical documentation.
โWe ordered 800 flange with threaded nipple assemblies for an industrial firewater upgrade. The machining quality was excellent โ every thread gauge-clean. The galvanized finish was uniform and free of drips. Highly recommend for value and reliability.โ
โVery responsive team. They provided EN 10204 3.1 certificates, PMI reports, and hydrostatic test data before we even confirmed the PO. Our QA department was impressed by the documentation quality.โ
โWe compared quotations from four Chinese suppliers. Cangzhou Weihuan gave us the most complete spec sheet, the fastest sample delivery, and the clearest Incoterms. We placed a $180,000 annual contract for unthreaded pipe flanges.โ
David Liang โ Senior Pipeline Fittings Engineer & Industry Analyst
David has spent 14 years in the steel pipe & fittings industry, leading technical sales and quality teams at Cangzhou Weihuan Pipeline Equipment Co., Ltd. He is a certified welding inspector (CWI) and has contributed to flange connection design reviews for oil & gas, water, and fire protection projects in North America, Europe, and the Middle East. His articles on piping component selection have been referenced by engineering consultancies and procurement teams in 6 countries.
Cangzhou Weihuan Pipeline Equipment Co., Ltd. ยท Member: ASTM International ยท ASME B16.5 standards committee observer
Apr 03,26
The Indispensable 50mm Threaded Flange for Reliable Industrial Connections
Jun 15,26
Industrial Piping Guide for 3 inch slip on flange and Fittings
Apr 22,26
Industrial Brass Threaded Flange for Corrosion Resistant Piping
Apr 27,26
Industrial 8 Threaded Flange for Precision Piping Systems
May 25,26
A welded tee is a pipe fitting designed to connect three sections of pipe together. It forms a T-shaped structure where one branch pipe joins the main run pipe at a 90-degree angle. Depending on the application, pressure level, material grade, and fabrication method, there are several different types of welded tees available in the market.
Sep 24,26
Global infrastructure investment continues to grow as countries expand energy networks, modernize industrial facilities, improve water transportation systems, and strengthen critical transportation infrastructure.ย
SUBSCRIBE NEWSLETTER
